The BiFold Gate solution is a game-changer for adding a trackless gate to smaller openings, such as in cities. From Milan to New York, to Washington, D.C., BiFold gates are providing homeowners with a better solution. And, it can be automated! This kit includes the hardware needed to add the folding behavior to a two-leaf gate (up to 16 feet at 385 lb., or minimum 7 feet at 880 lb.). We also include channel CG254, 1-9/16″ x 1-9/16″ x 14 ga x 78.5″ long, to support your setup.

For additional information and videos, click here.

Need to cover a wider space? Add a second kit for a double, two-leaf setup and cover up to 32 feet. Or check out the new heavy duty version that can cover bigger and heavier gates!

Have a question about your setup, or installation? Our experienced staff is ready to help, contact us.

Download full reference table for maximum weight capacity based on opening size and gate height.

Fabrication Considerations

While the BiFold gate hardware kit can support a variety of gate styles, designs and dimensions, care must be taken to ensure your gate is compatible with the folding hinge mechanisms:

• Use a 2″ square tube outer frame to fit the leaf hinge mountings and permit full folding of the two leaves
• Use at least a 3″ wide section to mount the column joint arm on the first leaf (closest to the post)
• The top and bottom post hinges must be welded to the gate

Installation Instructions

Click here to download instructions for assembly and installation onto a gate (PDF).

An assembly and installation video from the manufacturer is available here.

Need a CAD model? Head on over to our Technical Data section (must be logged in to view).

Frequently Asked Questions

Is the BiFold gate kit compatible with gate automation?

• Yes. The kit hardware is compatible with swing and in-ground gate automation solutions. We recommend consulting with a gate automation provider to select the best solution for your project.

 Note:

• The manufacturer recommends no solid panels for the gate; air should be able to flow.
• Due to the nature of the item (kit components), we are unable to accept returns. If a manufacturing defect is suspected, leave hardware on the gate(s) to take pictures/videos and let us know scope of project. We will submit all information to the manufacturer for evaluation.